ASW Electrical are your local Beenleigh electricians. Older homes, new builds, urgent faults and commercial work — we show up on time, do the job properly, and back every job with a lifetime workmanship guarantee.
ASW Electrical is a family-owned electrical contractor with over 25 years of experience across residential, commercial and industrial work. We service Beenleigh and the surrounding suburbs with the same team, the same standards and the same guarantee on every job.
Beenleigh has some of the oldest housing in the region, and older houses ask different questions of an electrician. We spend a lot of our time here on switchboards, wiring, and answering the one that matters most: is this safe?
From emergency callouts and switchboard upgrades to full rewires and commercial fit-outs — we handle the complete scope of electrical work for homes and businesses across Beenleigh.
Power out? Switchboard tripped? Burning smell from a socket? We respond fast — any hour, any day, 365 days a year.
Beenleigh has more ceramic fuse boards still in service than almost anywhere else we work. We upgrade and replace switchboards to current Australian Standards, install RCD safety switches, and certify the work.
Structured data cabling, NBN points, home office setups, CCTV cabling and commercial network installations — tested and certified.
Downlight installations, LED upgrades, outdoor lighting, feature lighting and full lighting design for renovations and new builds.
Faulty element? No hot water? We repair and replace electric hot water systems — most jobs completed same day.
Full electrical fit-out for kitchen and bathroom renovations, extensions and new builds — including the newer estates around Beenleigh. In older homes a renovation is usually the right moment to replace ageing wiring in the affected areas rather than build over it.
Office, retail, hospitality and industrial electrical fit-outs. Scheduled maintenance contracts and safety compliance audits for commercial properties.
Additional powerpoints, dedicated appliance circuits, outdoor GPOs and RCD safety switch installation — plus full electrical safety inspections, which is where most of our Beenleigh jobs begin. Particularly worth doing if you've just bought an older property.
Contact us by phone or submit a quick enquiry. For emergencies, always call.
We confirm your appointment and give you an arrival window.
We inspect the job and give you a clear quote before touching anything.
We carry out the work, clean up, and walk you through what was done.
All work is carried out by fully licensed electricians. We hold all required certifications and insurances — available on request.
ASW Electrical has been providing electrical services to homes and businesses across Brisbane and South East Queensland for more than 25 years. Beenleigh is a suburb where that experience earns its keep, because a large share of the housing here predates the standards that today’s wiring is built to.
Beenleigh is one of the oldest towns in South East Queensland, and the housing reflects it — pre-war and post-war timber homes, Queenslanders on stumps, and a big band of 1960s and 70s brick through the established streets. Plenty of it has never been fully rewired. What we find in these homes is fairly consistent: ceramic fuse boards with no safety switch protection, ageing rubber or fabric-insulated cabling that has gone brittle in the roof space, undersized sub-mains, powerpoints running off circuits that were never designed for the load, and additions wired in over the years by whoever was available at the time.
None of that means a house is dangerous today. But it does mean the honest answer to “is my wiring okay?” is that somebody needs to get into the roof space and look. An electrical safety inspection is the sensible starting point — we check the board, test the circuits, inspect accessible cabling and tell you plainly what needs doing now, what can wait, and what is genuinely fine. If a full rewire is warranted we will say so, and if it is not, we will say that too. We would rather quote a switchboard upgrade you actually need than a rewire you don’t.
This matters most when a property changes hands. If you have just bought an older Beenleigh home, an inspection before you start renovating is the cheapest hour you will spend on the project — because finding the problem after the plasterboard is up costs several times more. And if you are selling or leasing, the property has to have compliant interconnected photoelectric smoke alarms before it changes hands. That has been the law in Queensland since 2022, and owner-occupied homes have until 1 January 2027 to catch up. Full detail is on our QLD smoke alarm requirements page.
Beenleigh is not only older housing. The estates on the town’s edges are far newer, and the work there is renovations, extensions, downlight and LED upgrades, air conditioning circuits, outdoor and entertaining-area power, and data cabling for home offices. We also do a steady amount of commercial work through the Beenleigh town centre and out toward the industrial and trade businesses along the Yatala corridor — shop and office fit-outs, three-phase installations, machinery circuits, scheduled maintenance and compliance audits.
Every job runs the same way. An arrival window, a call ahead if anything changes, an on-site assessment and a clear quote before we start, and enough stock on the van to finish most jobs in one visit. All work is carried out by licensed Queensland electricians under the Electrical Safety Act, we carry current public liability and professional indemnity insurance, and everything is backed by our lifetime workmanship guarantee.
We service Beenleigh and the surrounding suburbs, and we’re part of our wider team covering electricians across Logan.
The clearest signs are a ceramic fuse board rather than circuit breakers, no RCD safety switches, frequent tripping, flickering lights, discoloured or warm powerpoints, and a burning smell near switches or the board. Any of those warrant an inspection. That said, plenty of older homes need only a switchboard upgrade and some circuit work rather than a full rewire — we assess, tell you which it is, and quote accordingly.
Yes, and it’s one of the most useful things you can do with an older Beenleigh property. We check the switchboard, test the circuits and RCDs, inspect accessible wiring in the roof space and subfloor, and give you a plain assessment of what needs attention and roughly what order to do it in. Call 0450 440 569 to book one in.
We cover Beenleigh and the suburbs around it including Eagleby, Mount Warren Park, Windaroo, Bannockburn, Bahrs Scrub, Holmview, Edens Landing, Waterford and out toward Yatala and Stapylton. If you’re not sure, call and we’ll confirm straight away.
For standard jobs we typically have availability within 24–48 hours. For emergencies we aim to be on site within 1–2 hours depending on the time of day. Call 0450 440 569 for the fastest response.
Yes — after-hours and weekend callouts carry a higher rate, which we always disclose upfront before starting work. No hidden charges, ever.
All ASW Electrical technicians are fully licensed Queensland electricians with current public liability and professional indemnity insurance. Licence and insurance details are available on request.
Our Beenleigh team covers the following suburbs and surrounding areas:
Don’t see your suburb? Give us a call — we cover a wide area and can often accommodate requests outside our standard zones.
Call us or send a quick enquiry and we’ll get back to you fast. For emergencies, call directly — we’re available 24 hours a day, 7 days a week across Beenleigh and the surrounding suburbs.